Quick Guide to Setup Amped Range Extender SR10000
In this modern era, Amped is a popular brand that manufactures incredible range extenders. The networking device of Amped completely met the user’s need. The best thing about Amped WiFi is that it offers all of the latest amazing features that are complete with the latest technology and you will get all this within your budget. Plus, now you don’t need to worry about dead zones because it boosts the existing network to every nook and cranny of your house. Moreover, you can easily do the Amped range extender SR10000 setup be access the setup.ampedwireless.com default web address. If you are unaware of the steps to update the extender, then you have come to the right place.
In this blog, we cover the manual method steps to install the Amped range extender sr10000. So, we recommend you read out the post from up to bottom.
First, we want to tell you about the important necessities related to the process that you need to get ready. By preparing all the things before the process, you will able to get the extender setup successfully.
Prerequisites | Amped Range Extender SR10000 Setup
- Sufficient power supply.
- Quality Ethernet cable.
- Default web address.
- Need of computer or laptop.
- Updated internet browser.
These are the things that you need to get ready before performing the Amped range extender SR10000 set up in your home. Now let’s move to the configuration steps.
Amped Range Extender SR10000 Setup | Web Interface
In this section, we discuss all the steps of the web interface method to install the Amped Range Extender SR10000. You can also call this process the manual method. For further detail follow the following steps:
Power on the Extender
Once you unbox your brand extender, you need to give the power supply to the extender by plugging it into the non-damaged wall outlet which supplies the fluctuation-free power supply.
After plugging the device into the socket, press the turn-on button until you see the stable light on the extender.
Once the LED light on the extender is stable, it means your device is booted up for further steps.
Connect Extender and Router
Making the connection between the host router and Amped range extender SR10000 is very important because,, with the help of internet connectivity, you will able to complete the process easier and on time. So, to connect the devices you have two methods wire or wireless. You can go with any one of them according to your convenience.
Note: whatever the connection mode you will use you just need to ensure that both devices are communicating properly without any issues.
Open the Internet browser
Now, you need to launch the internet browser. To do this, switch on the computer or laptop by plugging it into the wall outlet. Once the device is booted up open any internet browser on the device. Make sure you use the upgraded browser for the process.
In addition, if your device has an extra file like cache and cookies then try to delete them because this extra trash corrupts the internal files.
Access the Default Web Address
Once the browser is open put the default web address of the Amped range extender SR10000 into the address bar. If you are unaware of the web address then put this Setup.ampedwireless.com URL into the address bar.
During typing the address make sure the caps lock key of the keyboard is off and do not make the typing mistake also. Otherwise, you might not be able to access the Amped wireless extender setup page.
Thereafter, click on the Login button.
Now you will see the dashboard of the Amped range extender SR10000 on your computer screen. Which you need to follow the on-screen prompts to get a successful setup.
Therefore, these are the most important steps that you need to perform to get access to Amped range extender SR10000 setup.
