A Brief Guide to Amped WiFi Extender Placement
Amped range extenders are quite affordable. However, these might be very tricky to set up. Many people are not even aware of Amped range WiFi extender placement. They just choose a random space in their house. Later, complaints of slow internet connection or poor WiFi network become frequent. These happen because of the wrong WiFi extender placement.
We know what matters the most during WiFi extender placement. So, you should get through this post to know what to avoid during extender placement. In case you feel stuck, get contact our tech experts. Keep reading.
How to do WiFi Extender Placement?
Find Right Spot
The right spot means the Amped range extender must have proper ventilation. We understand that you might not have the wall socket in the open space. Worry not! In that case, you can get hold of the extension cord to avoid walls or under the table placement.
Furthermore, the right spot for WiFi extender placement might depend on your house or area coverage. Therefore, you must observe the location to set your extender.
Multistory Buildings: Upstairs/Downstairs Placement
As mentioned above, the coverage area plays a major role in WiFi extender placement. For instance, if you want WiFi signals on the top floor, you need to place the extender close to the ceiling. But, if your major concern is to get signals in the basement, you must place them on the floor.
In case you have two floors above the ground, you need to place the WiFi extender on the first floor. It covers equal distance above and below the first floor.
Always Avoid Obstacles
A few common obstacles to poor network reception are microwaves, baby monitors, cordless phones, fish tanks, washing machines, mirrors, metal objects, refrigerators, etc. During WiFi extender placement, you should set the device as far as possible.
If you don’t follow these steps, you can’t even access http//setup.amped wireless.com SR10000 setup wizard. So, you need to have access to the WiFi signals for a seamless internet experience.
Raise the Extender Height
In case you have a single floor to cover, you must never place the WiFi extender on the ground. Rather, you should raise your extender to at least 4 feet. Why so? Well, the single-sided direction of WiFi signals won’t change the route for you.
Rather, you have to do the Amped WiFi extender placement such that the signals reach out to you instantly. Hence, that is possible when you raise the height of your Amped WiFi extender.
Choose Optimal Distance
As much as your distance from the Amped wireless extender is crucial, the extender must also be close to the host router. But, closeness should be optimal. Both the devices must not just sit side by side. Rather, you have to measure the router range and then do the Amped WiFi extender placement.
Placing devices too close can lead to WiFi signal clashes. In short, the range, signal strength, and connectivity are going to decrease. To ensure that does not happen, you have to choose an optimal router-extender distance.
Keep Antennas Upward
You can easily change the direction of your Amped WiFi extender antennas. However, people don’t know what should be the ideal angle for the antennas. Rather, they simply move the antennas in the direction they like.
You must avoid such acts. The extender antennas should be straight to the top. It improves the WiFi signal range and connectivity.
Set Extender in AP Mode
We know that wireless connections could be a pain in the head sometimes. It means you can’t just get the right range and internet connection speed. In that case, you must set the extender in AP mode. It means you should connect your Amped range extender to the host router via the Ethernet cable.
So, for this WiFi extender placement method, you will require an Ethernet cable. It should be tight on both ends when connected. Moreover, there must not be any cuts on the cable if you want to set the extender in the AP mode.
We hope you have perfectly done the Amped WiFi extender placement. In case you want any help with the placement or any other issues, you must contact our tech executives. With the right placement, you have access to a seamless internet connection.