Amped Wireless Extender Setup Guide

Is your WiFi router not giving you lag-free internet connectivity? If so, it is suggested that you setup wireless extender at your home. Doing Amped wireless extender setup will help you turn dead zones in your home into fun zones and enjoy internet in every nook and cranny. If you are wondering how to setup Amped wireless extender, then this guide will explain everything you need to know. Here, we’ll inform you about every step for getting success with the wireless setup. So, with no more delay, let’s get started!

Amped Setup: Everything You Need to Know

Users can setup thier Wireless extender using two methods. Either WPS or Web browser method can be used for making the device operational. However, for the methods, there are some requirements to be handy before you start the process. Let’s check them out

Amped Wireless Setup via WPS – Prerequisites

  • A WPS supported router
  • Access to a working and fluctuation-free power socket
  • High-speed internet
  • And of course, the extender

Amped Wireless Setup via Web Browser – Prerequisites

  • An Ethernet cable
  • Default web address
  • A virus-free device
  • Access to a working and fluctuation-free power socket
  • High-speed internet
  • Amped extender
Amped Extender Login

Once you get all these things handy, walk through the next sections and learn how to setup Amped wireless extender in a matter of minutes.

How to Setup Amped Wireless Extender via WPS?

Amped Extender Login

WPS stands for Wi-Fi Protected Setup. This method is also called as one-touch or push-button setup. For getting success with the setup process through WPS, all you need to do is:

  • Place your extender in the room where you have already configured your home router.
  • Plug in the extender to a wall outlet and then set the power button to the on position.
  • Press the WPS button on the range extender.
  • The LED on your extender will start blinking.
  • Now, press the WPS button on your router.

That’s all! This is how you can setup the wireless extender using the WPS button. If your router is not supporting the one-touch setup, check out the next section and learn to do Amped wireless extender setup using

Setup Amped Wireless Extender via

As soon as you are done with placing your extender and connecting its antennas, start following the steps given below:

Amped Wireless Extender
  • Connect the extender to your home router.

Quick Tip: You can either connect the devices using an Ethernet cable or wirelessly. We recommend you opt for a wired connection for avoiding facing any issues during the extender setup.

  • Once done, plug in the extender to a power outlet and turn on the power button.
  • On your computer, open a web browser.
  • You can use any web browser such as Chrome, Firefox, Edge, Safari, etc.
  • Type into the web address field of your browser.
  • As soon as you press the Enter key, you will get redirected to the dashboard of your extender.
  • Navigate to settings and click Scan for selecting the network you want to expand.
  • Click Next to apply the settings.
  • Thereafter, certain instructions will reveal on your system’s screen.

Follow all the instructions carefully and complete the wireless extender setup using Not Working

Users while doing the setup majorly get stuck with a problem “ not working”. If you are also facing the same issue, then this section will lend you a helping hand. Check the tips given below and fix the not working issue in a jiffy.

1. Check Device Connectivity

Perhaps there is a flaw in the connectivity between your devices, resulting in the not working issue. For fixing this, check all the connections made by you between your devices like modem, router, and extender.

2. Update Web Browser

Use of an outdated web browser can also drag you to the or not working problem. However, you can get this fixed by updating your web browser to the latest software version. If you already have another updated web browser available on your system, you can switch to the same.

3. Remove Junk from Web Browser

Accumulation of cache, cookies, and browsing history in your web browser could also be one of the reasons why you are not able to access the web address. For fixing this, consider removing all the junk from your web browser and restarting it.

4. Avoid Typos in Web Address

Users also fall victim to the not working issue if there are some typing errors in the web address. Thus, check the entree you have made for accessing the dashboard of your extender and see if everything is on track.

5. Change Your Device

It is assumed that the device you are using to access is infected with viruses or malicious content. If that is true, you will not be able to land on the setup wizard. Hence, try changing your device and see if this helps you get rid of the issue you are struggling with for a long time.

The aforementioned tips will help you get rid of the not working issue.

Can’t Setup Amped Wireless Extender?

If even after checking the setup methods and hacks given above for the not working issue, you still are not able to do the wireless extender setup, worry not. Below we are going to give you a nudge on possible reasons behind the issue along with their possible fixes. Stick to reading!

Amped Extender Login
Reasons: Why You Can’t Setup Amped Wireless Extender
  • Technical glitches with the hardware or software of your device
  • Use of broken or damaged Ethernet cable
  • Availability of Antivirus, Firewall, or Ad-blocker on your device
  • Improper supply of power
  • Wrong use of default web address
  • Improper placement of your devices
  • WiFi interference from near things/appliances

As you get to know the reasons making you struggle with the Amped wireless setup issues, let’s now give you an overview of methods for fixing each of these. Here we go.

Troubleshoot Amped Wireless Setup Issues

Reboot Your Extender

Technical glitches in your device can stop you from doing Amped wireless extender setup. The best solution to get rid of the issue is to reboot your extender. For this, simply disconnect your extender from all the connected devices, unplug it from its power socket, let your device rest without power for some time, plug the extender back into its socket, and you’re done! Now, try doing the setup using web address. This time, perhaps, you will succeed with the process.

Change Ethernet Cable

Are you making use of an Ethernet cable to connect your extender to the host router? If yes, then make sure the cable used for the process is not torn off from any point. If any cut is there on the cable, get the cable replaced with a new one without delay. This can also help you fix the issue at hand.

Disable Some Apps

If the device used by you for doing the wireless extender setup is packed with apps like Antivirus, Ad-blocker, and Firewall; then also you may face the issue you are currently facing. Therefore, for completing the Amped wireless setup, you need temporarily disable such apps on your device. Once done, try accessing web address for configuring your extender and see if this brings you any luck.

Change the Power Socket

If the power outlets used by you for plugging your router and extender are not offering an adequate power supply, then also you will not be able to complete Amped setup. For getting this fixed, check the power socket and if any flaw is found with the same, consider plugging your device into different sockets. Make sure the socket you choose is working and supplying fluctuation-free power.

Check the Web Address Destination

We already mentioned that users often make typing mistakes while entering the web address. Thus, if you have checked the same but still are facing issues while doing wireless setup, possibly the destination selected for the address is incorrect. You are suggested to type the web address of Amped extender in the address field of your web browser. So, in case you typed it in to search field, correct your mistake right away.

Relocate the Extender

Placement plays a vital role when it comes to getting success with the extender setup. If you have placed the extender in a corner, beneath a desk, or in a filing cabinet, then you will not be able to accomplish the setup task. The ideal place to locate the extender is somewhere in the central area of your home and within the range of your WiFi router. Also, ensure to place the extender on a higher surface. This way, it will be equally broadcasting WiFi signals to all areas of your home by eliminating the blockages and hindrances.

Keep WiFi Interference Away

Last but not least, you may get into the problem of setup not accomplishing due to WiFi interference. In that case, you need to locate the extender away from interference-causing devices. Such examples include, Bluetooth speakers, cordless phones, baby monitors, refrigerators, microwave ovens, and treadmills are the major culprits causing WiFi interference.

Once you are done with trying all the troubleshooting hacks given above, hopefully, you will be able to complete the wireless setup process.

Things to Do After Completing Amped Wireless Setup

Are you all done with the Amped wireless setup process? Great! We must congratulate you for all your efforts made. Well, your task doesn’t end here. We want to highlight some to-do points you must execute after completing Amped wireless extender setup.

Change Password: If you never want to compromise the security of your WiFi device, it is suggested that you change the default password of your extender after completing the setup.

Create Guest Network Account: Many users avoid sharing their WiFi passwords with their guests. If you are also one of those, create a guest network account on your extender and keep your admin details safe only with you.

Hide SSID: If you want to keep your WiFi safe from unauthorized access, you should hide the SSID of your extender by accessing the web address.

Update Firmware: Firmware updates bring various bug fixes and security improvements to your device. Thus, whenever you find any new firmware for your extender, get it updated.

Enable Access Schedule: As soon as you complete the Amped wireless setup process, you will be able to enable the access schedule feature. This lets you enable and disable your WiFi as per your needs

Activate User Access Control: You can also allow or deny access to users for your Amped extender. For this, however, you need to first enable the feature by accessing the dashboard of your extender.

Making all these changes after doing the setup will certainly take your internet-using experience with the device to the next level.

Most Common Issues Faced While Doing Amped Setup

Although Amped extenders have taken the WiFi industry by storm when it comes to offering blazing-fast internet access, the devices are also prone to some technical issues. These issues are usually troubling users while executing the Wireless extender setup process. Some of the most common issues are as follows:

  • Amped wireless setup not working
  • Can’t access
  • WPS LED keeps blinking
  • WiFi extender won’t connect to router
  • Default login details not working
  • Connectivity issues
  • The extender keeps dropping internet
  • Unable to create guest network
  • Can’t reset Amped extender
  • Extender not finding network
  • Can’t change network settings
  • Extender showing 404 error
  • Amped setup wizard not appearing
Amped Wireless Extender

Our Recent Posts

Amped Extender Troubleshooting Tips to Fix Login Issues

Amped Extender Troubleshooting Tips to Fix Login Issues

If you have got Amped extender setup done at your home, then you must be aware of its login process. If you have do...

Read More »

Is Your Amped Extender Not Working? Know the Reasons Here!

Is Your Amped Extender Not Working? Know the Reasons Here!

To get the enhanced WiFi coverage in every nook and cranny of the house, it is necessary that a wireless range exte...

Read More »

Setup Amped Range Extender SR10000

Quick Guide to Setup Amped Range Extender SR10000

In this modern era, Amped is a popular brand that manufactures incredible range extenders. The networking devi...

Read More »

Amped Wireless Extender – FAQs

  • Amped extender not turning on. Why?

    There could be some problem with the hardware of your extender making you experience the extender not turning on issue. Apart from that, make sure the wall outlet selected by you for plugging your extender is working fine. If it is not, consider plugging your extender to a different wall socket.

  • You might be facing extender bricked issue due to the wrong installation of the firmware on your device. Thus, cross-check if you have updated the firmware on your extender as per its model number. If not, then you need to reset your extender to the default settings.

  • Cross-check if you have entered the web address into the address field of your web browser. Also, ensure that there are no typing mistakes in the web address entered by you. If still you are getting redirected to an error message while accessing, then consider updating your web browser to the most recent version and see if helps you fix the issue.

    • Use a coaxial cable to connect the extender to the router
    • Change the password of your extender
    • Switch to a different WiFi channel of your extender
    • Disable WiFi protection
    • Reboot your device
    • Make sure no interference-causing device is placed near your extender
  • You might be facing the WiFi dropping issue on your extender due to the following reasons:

    • The firmware of your extender is not updated
    • Amped extender is fetching signal interference from nearby appliances
    • Someone is leeching your WiFi
    • The connection between the router and extender is not firm
    • You have not completed the Amped setup process in a proper manner
Ask Me provides information for issues related to Amped devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only for referential purpose. Our services are provided only on request by users.